NEWS ON YOUTUBE Aug 3 2018
Let’s continue with the Blocky puzzle challenge.
We identified a packet sent from the server to the client that contains the state of the
input buttons, 32bits and the state of all the output lines.
We then used the proxy to inject random input states and collect a lot of data.
And so I have been running this brute-forcing over night.
wc -l counts the lines of a file and with watch, which is just executing wc over and
over, we can easily observe how the test data grows.
So shortly after I started around midnight I had already 4000 samples, and then I went
In the next morning after 9:00 am we had 100.000 samples.
But I let it run even longer and in the end I had about 340.000 samples.
So… how can we do machine learning with that?
First of all, before we even do any real analysis of this data, we have to figure out which
output bits are actually important for us.
Not all of the over 170 bits are useful.
Some are just the lines directly connected to the button, or other lines in the middle.
So we have to figure out which are the important output bits.
If you look at the data you can immediately see that every output starts with 6 1s, and
then two 0s.
And that makes sense if you look at the end of the puzzle.
The final stage of the puzzle just combines a lot of output lines with OR gates.
So if only one of these lines is HIGH, a 1, then the OR result will be HIGH, and all these
lines will be high.
You can see for example here the very first OR gate in this chain, with 3 inputs.
And with the random button inputs it’s very rare that all 3 of them are 0.
Thus the output is almost always high and thus the whole chain stays high.
And at the end of the chain the signal is inverted, and so we then have two low.
Because we probably never guessed the correct input and one of these lines will always be
high, thus we see this pattern here.
This means that the important output lines for us are the ones feeding into the final
Those must be 0, and then the whole line becomes 0 and thus the final door opens.
Now we need to find which bits in our output correspond to these OR inputs.
To do that I simply position myself over the puzzle and then use the proxy to inject a
Then I write down the state of one OR input.
Get another random input, and write down the states.
And I’m continuing this for a bit and we get this ON/OFF pattern for these two lines
to the OR gate.
Now we can take our over 170 bits output and try to find this pattern in there.
To help with that I wrote a few simple loops in python.
Btw I’m using jupyter notebook here, easy to run with Anaconda, because this kind of
exploratory data analysis is really nice with it.
The outer loop goes over each bit.
So first we look at the first bit of our output.
Then we go over each test case.
So we basically compare the first bit of the output with the pattern we have written down.
If they match, cool.
But if they don’t match we break out of the loop.
And then we check the next bit.
We go over each second bit in the output, compare it to our pattern and if it finds
a bit that doesn’t match, we break out.
But if all bits would match, we would never break out of the for loop and then this else
case of the for loop is executed.
YEP, for loops can have an else cases, which is executed when we didn’t break.
This means we found a output bit that matches the pattern.
But when we did that we find two matching bits.
172 and 173.
Let’s see if they indeed are always the same, or if we just need more data.
So I collect a few more samples so that if indeed it was just coincidence, then the probability
that they would still match goes very low.
And when we run this now, indeed, we see now that 173 is the magic bit.
Now we just have to keep doing that for all OR gate inputs.
Write it down and then we get all the important output bits.
Infact there are 15.
So we can ignore the rest.
So our goal is it to get all of these bits to 0.
Because then the whole chain stays off, the inverter makes it high and the door will open.
Before I mentioned anything about machine learning, I wanted to say that what I have
is “gefährliches halbwissen”.
That is a cool german expression and it translates to “dangerous superficial knowledge”,
you use this to describe somebody who knows a little bit and they think they know enough
to voice an opinion, but their views or opinions are dangerous because they only have superficial
knowledge and don’t really get it.
And that very much applies to me.
So I will not prefix everything I say with a “sorry, maybe, I’m not sure”, and
will just tell you what is currently going on in my head.
I’m just sharing with you the process of me learning.
And that also means to do dumb stuff.
So I try to use the little bit of knowledge I have and see how far I can get.
I know very well that a professional would do it completely differently.
And in some way I’m really scared to share my thoughts, that’s also the reason for
this disclaimer, because I’m well aware that they are probably wrong.
So if you are a professional in this field, I’d love to know what I got right and what
I got wrong.
And if somebody of you can make a proper model, I would LOVE to see it.
So first of all, what kind of algorithm or method of machine learning or AI should we
Most of you probably know about neural networks, deep learning and stuff.
And we have 32 input bits and 15 important output bits.
That could be something that could be modeled with a neural network, right?
Each input bit connects to simple binary functions, ANDs and ORs and those outputs connect again
with other simple functions and eventually result in the 15 output bits.
And I think a well modelled neural network could totally solve this.
Basically each neuron, or a combination of neurons could implement such a simple logical
function, and thus if we have multiple layers it should theoretically be perfectly able
to learn that.
But if you model it like that, then you are just predicting the output for a given input.
And that doesn’t really help us because we don’t want to know what a given input
gives us, we can just test that already ingame, right.
What we want is, we know the output we want.
We want the output to be all 0.
So actually what we want to know is, what inputs lead to the outputs being all 0.
Which means we probably want to reverse the model.
The output bits become the input of the network and the input bits become the output of the
So the neural network would train the theoretical inverse of the binary function.
Given these output bits, what was the input for it.
If that works, we could maybe ask the network to tell us, here we have these 0 output bits,
what would the input be.
But the inverse of an OR and AND function is not that simple, right?
For example for an OR gate you know that 0 means the inputs were 0, but if it was 1,
then one or both inputs could have been 1.
So that introduces an uncertainty and I would hope the neural network still could work with
that, but I don’t know.
The whole magic or difficulty for neural networks, as far as I understand, is mostly deciding
how many layers the network should have, what kind of activation function to use and a lot
of other stuff.
And that’s exactly why I have no clue what I am doing.
I think I could look at the activation functions and know that for our case we probably don’t
want something like sigmoid because that models more like analog data, and we want something
more digital, ON/OFF, so maybe a Rectified linear unit or even binary step function,
because here certain connections can be completely turned off – and that’s what we want because
not every input bit is connected to every function in the real network.
I even went so far to checkout tensorflow, I installed it and I googled for “neural
networks boolean tensorflow”, because essentially we have boolean data.
And there was one blog post in particular, “Solving XOR with a Neural Network in Tensorflow”,
which caught my attention, because we also want to learn boolean functions, just something
I and I started to adapt that code to my problem, but then I also kinda gave up…
I think I need to do a bit more learning of basics and playing with known simpler examples
before I try to apply this to something so weird.
But there was another thing I wanted to try out.
You see neural networks are just one topic, there are a lot of other machine learning
algorithms out there.
And there is a whole subcategory about learning rules and decision trees.
The goal [of a decision tree] is to create a model that predicts the value of a target
variable based on several input variables.
That’s exactly what we want.
I thought maybe we can just use such an algorithm to find exactly the binary AND and OR combinations
of input bits that lead to this particular output.
And then we can solve that with z3 And I remembered a tool that I have seen once
Weka is a collection of machine learning algorithms for data mining tasks.
It’s a tool from the Machine Learning Group at the University of Waikato in New Zealand.
To work with this tool I quickly transform the data into an arff file format, which basically
just describes the attributes we have in our file and splits it all to comma separated
So here we can open the file and load all attributes.
Let’s only look at one particular output bit, so I remove the others from the dataset.
Then in the classify tab we can select an algorithm from a list of many many different
Again, I have no clue what I am doing so I just select one, let it run and see what happens.
As a test the output bit I selected is not one of our final ones, it’s a simpler one,
an output state much earlier in the whole puzzle.
There are also a lot of variables you can control, but I have no clue so I just click
And very quickly it extracted some rules, a decision list.
So this particular output bit is influenced by input bit_31 and bit_12.
Let’s write this down in a table.
It basically says, if input bit_31 was 0, then the output bit_17 is 0 as well.
Which means it doesn’t matter if bit_12 was 0 or 1 But if the input bit_31 was not
0, so it was 1, then bit_12 is important.
If bit_12 is 1, then our output is also 0, but if that was not the case, if bit_12 was
0, then the output bit is 1.
If we draw this as gates we have an AND gate that takes in the bit_31, but only triggers
when bit_12 is 0, so bit_12 goes through an inverter first.
So now only if bit_31 is high and bit_12 is low, the AND gate will put out a 1.
So we used a machine learning algorithm called PART to learn a simple gate.
Weka will also run this model on other data in the dataset and you see in all testcases
this ruleset is perfect.
So that is really cool and I tried it with one of our final output bits, which have much
more complex connections and gates going on.
That runs a bit longer and when finally a model was found, then it’s just insane long.
The number in parentheses shows how many of testcases are covered up to this particular
For the simple gate before half of all cases were already covered by the first rule, and
the other half was handled by these two rules.
But here we have rules that sometimes have only like 6 or 3 cases in our dataset.
So that doesn’t look good.
That looks like overfitting.
And also the test on the whole dataset reveals, that it’s only 99.8% correct.
Which is not bad, for a lot of real life applications it’s probably really good, but I was hoping
such an algorithm could really uncover the logic connections perfectly.
I tried a couple of different algorithms and weka really makes this explorative process
But again my lack of experience probably fails me here.
Maybe one of these algorithms if the variables are tweaked correctly could be perfect.
But I don’t know.
I gave up on this too.
Now you see I did all this over the course of many many hours and so I was handling this
training data a lot.
And one time I thought I could checkout how many inputs actually I resulted in a desired
0 in one of these output bits and I wrote this simple loop.
Just print the input if the particular output bit was 0.
I ran this and I couldn’t believe my eyes.
While the 0s and 1s were rushing by, I noticed one column to just stayed constant.
Look at this!
And that turned out to be true for every output bit.
Each output bit had at least one bit constant in the input.
Now the inverse of this was not true, not every input where this was a 1 resulted in
this output to be 0, but in every case where it was 0, this input bit was 1.
This means, our final solution MUST have these bits set to this constant value.
So I wrote a quick script to extract all constant bits and this is what I got.
This really surprised me.
Every second bit was constant!
This is awesome.
This also means, only 16bit of 32bit are remaining.
And bruteforcing 16bit, that’s easy.
There are just 65.000 possibilities left.
So I modified the proxy again, to instead of just using fully 32bit random values, to
keep 16bit fixed and bruteforce the other 16bit.
And in the packet parser we can then check the important bits to be all 0.
This means we found the valid input.
So I print WINNER WINNER and just kinda stop everything.
So I go in game, start the bruteforce and now we just have to wait.
I watched some TV show and came back to it like 1:30h later and to my surprise it was
It had disconnected but it found a valid input.
So here it is, this is the valid input.
Let me login again, and inject the packet with this value.
And here we go.
And the door opened.
Let’s have a look at that from the top perspecitve.
So door is closed.
And injecting the correct input packet and boom.
Evert output is 0.
Let’s walk to the open chest and get the “Flag of the Block”.
And also the weapon Heap Spray!
Of course Heapspray is a Shotgun.
Haha And here is the final input.
While my machine learning idea didn’t work out how I was hoping, I think the solution
is still cool.
Through data analysis we found that half of all input buttons have to be fixed, and so
w reduced the brute-force search space dramatically to only 16bit.
And that was easy to do.
For more infomation >> Failing at Machine Learning (Blocky part 2) – Pwn Adventure 3 – Duration: 14:34.
How Tekken Is Changed In Different Countries – Duration: 6:32. Like most games, the Tekken series has an interesting range of changes that have been
made to the games over the years, either in different countries around the world or sometimes
changes being made worldwide for one reason or another.
For instance, did you know that this PlayStation ad for Tekken 3 got banned in the UK by the
Advertising Standards Authority?
As this magazine reports, the ASA thought the ad was likely to cause offense and so
not only pulled the advertising campaign, but also forced Sony to first vet all future
poster advertisements through them in future.
Sony defended the poster, saying it was meant to show “a surreal situation by positioning
the body parts in the manner reminiscent of a cartoon character” – but, nonetheless, the
ASA’s decision still stood by.
Moving things over to Korea, where the character Alisa has been censored in all versions ever
since her introduction in Tekken 6: Bloodline Rebellion.
Whilst elsewhere, the humanoid robot can sprout chainsaws during combat, all Korean versions
have instead replaced these with lightsaber-like devices.
That’s not all though.
The Korean versions also make other changes to Alisa so that her body parts can no longer
This includes her head which she will usually use in combat in various creative ways.
It’s not known why exactly this change has been made in Korea, although it is suspected
to be due to not wanting a higher age rating or due to the title’s heavy Korean eSports
presence, and the fact it is often broadcast on TV.
Back to Tekken 3 and this time for some censorship that was made to all English versions of the
As shown here in this split screen footage from Anna WIlliam’s ending, in the original
Japanese version on the right, the ending is longer and goes very differently.
In the English versions, the scene ends with Anna meeting some guys by the pool and walking
towards the camera with them.
Over in Japan though, Nina isn’t happy about this attention that she and her sister are
receiving and walks up to Anna and unhooks her bra.
The Japanese version then ends with Nina, not Anna, walking towards the camera.
Next up, we go to Germany, for an interesting change that had to be made to Pokkén Tournament
for Wii U and Pokkén Tournament DX for Nintendo Switch.
Whilst not a true Tekken game, the title fuses elements from the Tekken series into the Pokémon
universe and this is hinted at with its “Pokkén” name.
Over in Germany though, this name has the unfortunate effect of being similar to the
German word for “smallpox”.
Thus, for all German versions, the game now instead goes by the name Pokémon Tekken instead.
For another Tekken cross-over game, this time we have an explanation on how this over 9000
meme was inserted into Street Fighter X Tekken’s English translation…
As the website Legends Of Localization reports, everything is kept pretty similar in the Japanese
version, except that instead of “over 9000” the power level is given the precise number
It is clear that the English localizers decided to use this as an opportunity to reference
Dragon Ball Z and its popular over 9000 quote…
However, it’s possible that the original Japanese version was also referencing this scene from
You see, in the Japanese Dragon Ball dub, Vegata doesn’t say Goku’s power level is “over
9000″ but “over 8000” – meaning the Japanese Tekken line still fits.
Moving things to Tekken 2 and another regional difference between the Western and Japanese
The Japanese PlayStation release actually contained a theatre mode that you could unlock,
which allowed you to watch all of the game’s cutscenes at your leisure.
It’s unknown why this was removed over in the West but thankfully the theatre mode would
return in Tekken 3 and this time would be available worldwide.
And, as an added bonus, it even allowed you to insert Tekken 1’s and 2’s discs and watch
their cutscenes too.
This time for not a regional difference but an example of a game having to be altered
worldwide, following a piece of text being unknowingly put in the game that was likely
to cause offense.
In the original versions of Tekken Tag Tournament 2, there was Arabic text on the floor of the
Saudi Arabia stage and some of this text said Allah – the Muslim name for God.
Fans took to Twitter to point this out and the series producer responded, saying:
“We didn’t know that.
We will change stage design data as soon as possible.
We couldn’t read that.”
The fact that God’s name was on the floor of a fighting arena was considered disrespectful
and so the stage was promptly changed to remove this.
The Tekken series is far from being a stranger to some controversy though.
You may recall some of the many twists and turns that Tekken 7 took leading up to its
For instance, at one point Harada blamed, to quote, “SJWs” and suggested that the swimsuits
would be removed from English versions to avoid any controversy.
During another incident, the producer said that Lucky Chole would be removed from the
US version following criticism from some over her being too ‘cutesy’.
And then there was another incident, where the same producer told the world that Roger
Jr had to be removed from the Western versions over fear of complaints from “animal activists”.
When release day came around however, it was found that none of these reports turned out
to be true.
It was likely that the producer was just trying to be provocative and so perhaps this is something
you may want to keep in mind when it comes to any future incidents like these.
Sticking with that last point about “animal activists”, though, it is often reported on
the web that PETA, aka People for the Ethical Treatment of Animals, actually got in touch
with Namco in the early 2000s and complained over Anna’s Tekken 3 Zebra outfit and that
it promoted wearing fur.
Whatever the case, whilst Censored Gaming can’t prove or disapprove this as being true,
it seems to be a very commonly held belief and it’s also interesting to note how the
outfit didn’t make a return all the way up until Tekken 6.
Anyway, that’s all we have time for today but hopefully you have now learnt a few new
things about the different versions of Tekken around the world.
Think we’ve missed anything?
Please let us know in the comments below and let us know what games you want us to take
a look at next!
Until next time, thank you for watching!
For more infomation >> How Tekken Is Changed In Different Countries – Duration: 6:32.
Why Thanos Didn’t Need An Infinity Stone To Defeat The Hulk – Duration: 3:16. Avengers: Infinity War is a nonstop ride of block-rocking shockers, from the unexpected
deaths of almost everyone fans love to the crushing finale in which the villain clearly
wins, at least, until Avengers 4 comes out.
But one of the movie’s most shocking moments comes within minutes of the start of the adventure,
and we’re not just talking about Loki croaking.
We’re speaking, of course, of the thorough beatdown that the Mad Titan Thanos administers
to the Avengers’ Big Green Guy, who pops out of nowhere on the Asgardian ship to ambush
Thanos, with hopes of solving the problem the villain presents before it even starts.
What actually happens is that the Hulk gets beaten down and more or less given the full
“Puny God” treatment after his attack on the purple man with the really gross chin.
As a matter of fact, Hulk gets beat up so hard during the fight that for the first time
ever, he’s actually left unwilling to fight on Bruce Banner’s behalf.
But how did the Mad Titan manage to hold his own against the Hulk before acquiring enough
Infinity Stones to make him effectively unbeatable?
Before the movie begins, Thanos gets the purple Power Stone from Guardians of the Galaxy by
Is that what he uses to get one over on the Hulk?
The answer may surprise you.
It turns out, when Thanos fights the Hulk for the first time, he’s not using the Power
Stone at all.
He’s just that strong on his own.
According to the movie’s commentary track with directors Joe and Anthony Russo and writers
Christopher Markus and Stephen McFeely, the filmmakers behind Infinity War made a conscious
decision to leave the power-increasing Infinity Stone out of the Thanos-Hulk fight.
For the sake of maximum intimidation, Thanos starts off the conflict at his base strength,
a classic Dragon Ball sort of move if there ever was one.
Joe Russo and Stephen McFeely have a little back-and-forth on the film’s commentary track
regarding Thanos’ formidable baseline power level.
McFeely raises the issue during the Asgardian ship scene, saying,
“Here you see the early establishment of just how fearsome Thanos is even without [the stones],
he’s got one stone here, and I don’t think he’s even using it.”
To which Russo replies,
“He’s not using it.
This is to show that Thanos, the Genghis Khan of the universe, is unbeatable in one-on-one
He’s conquered thousands of worlds.
He’s a much more polished fighter than the Hulk, and he dismantles the Hulk fairly quickly.”
The screenwriters previously discussed Thanos’ awesome skill set in an interview with Collider,
saying they wanted “to announce Thanos as the biggest villain in the MCU.”
“By defeating hulk relatively savagely and easily you’re hopefully.”
there’s a sense of dread over the course of the rest of the movie for anyone who will come up against him.
Anyone who’s seen Infinity War would likely attest to the fact that the early beatdown
Hulk takes from Thanos goes a long way toward proving the villain’s threat level.
Not only does he have the strength of the Hulk, he also has a brilliantly ambitious
mind that runs circles around the Hulk’s gray matter.
He’s strong, which makes him threatening, but it’s his brain that makes him terrifying.
But even with the filmmakers’ comments taken into consideration, the answer as to why Thanos
proves to be more than an even match for the Hulk comes down to something simple: Because
it’s extremely cool.
Make 19 movies’ worth of a convincing comic book universe on screen, and you’ve earned
the right to occasionally throw in something awesomely unexpected like a Thanos who’s way
stronger than anyone thought he’d be.
No one expected Space Grimace to be able to wipe the floor with Hulk like that.
Even on rewatch, it’s a heck of a way to start a movie.
For more infomation >> Why Thanos Didn’t Need An Infinity Stone To Defeat The Hulk – Duration: 3:16.
Mason Ramsey Performs ‘Famous’ on TRL! (Live Performance) | MTV – Duration: 3:47. NOW HERE HE IS PERFORMING FAMOUS FROM HIS EP
OF THE SAME NAME OUT RIGHT NOW.
EVERYBODY PUT THEIR HANDS
TOGETHER FOR THE ONE AND ONLY
♪ DON’T GET ME WRONG
IT’S PRETTY COOL TO BE ON TV
♪ SO ALL THE FOLKS BACK HOME
CAN SEE ME
♪ AND THAT I’M LIVIN’ IT OUT
ALL THE THINGS I USED TO DREAM
♪ YEAH, IT’S PRETTY GREAT
THE PLAYIN’ ON A STAGE
♪ PROUD ‘CAUSE THERE AIN’T
AN EMPTY SEAT IN THE PLACE
♪ BUT GIRL, EVER SINCE I MET YOU
I GOT A WHOLE NEW PERSPECTIVE
♪ IF I’M GONNA BE
FAMOUS FOR SOMETHIN’
♪ I WANNA BE FAMOUS
FOR LOVIN’ YOU
♪ IF I’M GONNA BE KNOWN
AROUND THE WORLD
I WANNA BECAUSE OF YOU, GIRL
♪ NOTHIN’ WRONG WITH THE
CENTER OF ATTENTION
♪ LONG AS I’M WITH YOU
I DON’T MIND THE PICTURES
♪ IF I’M GONNA BE FAMOUS
♪ GIRL, I WANNA BE FAMOUS
FOR LOVIN’ YOU
FAMOUS FOR LOVIN’ YOU
♪ YEAH, I HOPE THE FIRST
QUESTION PEOPLE ASK ME
♪ IS “HOW’S YOUR GIRL AND HOW’S
♪ I COULD GO ON AND ON AND ON
TALKIN’ ‘BOUT YOU FOR DAYS
♪ YOU CAN BET WHEN I HEAR,
♪ WANT IT TO BE BECAUSE
WE MADE IT
♪ ANOTHER FIVE YEARS
BEST THING I GOT IS RIGHT HERE
♪ IF I’M GONNA BE FAMOUS
♪ I WANNA BE FAMOUS
FOR LOVIN’ YOU
♪ IF I’M GONNA BE KNOWN
AROUND THE WORLD
I WANNA BECAUSE OF YOU, GIRL
♪ NOTHIN’ WRONG WITH THE
CENTER OF ATTENTION
♪ LONG AS I’M WITH YOU
I DON’T MIND THE PICTURES
♪ IF I’M GONNA BE FAMOUS
♪ GIRL, I WANNA BE FAMOUS
FOR LOVIN’ YOU
FAMOUS FOR LOVIN’ YOU
♪ IF I’M GONNA BE FAMOUS
♪ I WANNA BE FAMOUS
FOR LOVIN’ YOU
♪ IF I’M GONNA BE KNOWN
AROUND THE WORLD
I WANNA BECAUSE OF YOU, GIRL
♪ AND IF I’M GONNA GO DOWN IN
♪ I HOPE IT’S ALL ‘CAUSE OF
YOU AND ME
♪ IF I’M GONNA BE FAMOUS
♪ GIRL, I WANNA BE FAMOUS
FOR LOVIN’ YOU
♪ FAMOUS FOR LOVIN’ YOU
FAMOUS FOR LOVIN’ YOU ♪
FAMOUS FOR LOVIN’ YOU ♪
YOU CAN GET HIS EP FAMOUS OUT
RIGHT NOW OR FOLLOW HIM ON
INSTAGRAMMENT MAKE SURE YOU SUPPORT YOUR LOCAL WAL-MART
YODEL YOADZELLER, GIVE IT UP FOR MY MAN MASON RAMSEY.
For more infomation >> Mason Ramsey Performs ‘Famous’ on TRL! (Live Performance) | MTV – Duration: 3:47.
“Свидетели-2”. 65 серия – Duration: 46:52. For more infomation >> “Свидетели-2”. 65 серия – Duration: 46:52.
DIY Subaru STI Project – Tire Stickers Look Great and EZ To Do! Have Fun and Improvise! – Duration: 15:02. Hi Everyone! I’m Steve with Steve’s POV.
This is my son’s 2015 Subaru STI.
Not too long ago I put these Tire Stickers on the car.
Several weeks have passed and they still look really good!
If you watched that episode….
You saw that I had to improvise a bit with the application of the stickers.
The cement had hardened and I wasn’t able to apply it to the stickers the way it was intended.
I used a brush instead to apply he glue.
The result was still good… and 1 month later, driving the car daily, all the letters are still in place.
But…. after applying the letters TOYO to the tire…
4 letters alone look lonely on the tires…
There is a lot of tire and not a lot of Tire Stickers!
That is why I have decided to add more Tire stickers to the STI’s tires.
The guys at Tire Stickers were nice enough to send me another set.
Wow! Their boxing and packaging really looks good too now!!
Previously everything was packaged in a plastic bag…
These guys have really done great things with this product!
Look at this nice packaging!!
First thing out of the box….
the gloves that I never end up using!!
I know I should use them but I won’t! LOL
Next in the box is our letters… PROXES
TOYO on one side of the tire and PROXES on the opposite side.
That is what today’s DIY project is about…
I know I showed you how to do this in the last video, but…
I got a call from the guys at Tire Stickers right after I released the video…
“Steve, great job on the video, but…”
“You made a mistake!!”
I was a little embarrassed, but….
technically I made it work and the letters still look good!
I just had to improvise a little bit, thats all!! LOL
I think a little improvisation is important when doing a DIY (do it yourself) project.
The cement container tip had hardened (my fault) and the only way to apply the cement was with a brush…
I don’t think I’ll have that same problem this time with this fresh cement container.
What is this? It wasn’t in the old kit…
Tire Letter Cleaner
This is used to clean the back of the tire stickers before applying the cement and attaching to the tire.
Apparently this cleaner is not used to clean the actual tire!!
That’s what they told me I did wrong!!!
In the end, while it took a bit longer, it still cleaned the tire well enough for the cement to adhere.
What they said I needed to do was use Acetone to clean the tire properly first.
This stuff is kind of like paint thinner.
It smells kinda bad too.
Not as bad smelling as paint thinner but not good!!
Don’t sniff this stuff
But it should work great to get the oils off the tire and prep it right.
I strive to do it right this time!!
I’m sorry… my American side takes over sometimes and I don’t read directions at all!
They are written easily here and even still I don’t read them!
That’s my American half!! LOL
The work itself I try to do Japanese style; with strict attention to detail.
But I am an American so please understand I can only do the best I can do!! LOL
I will use Acetone on the tires and Tire Sticker Cleaner on the back of the letters.
And the cement is good to go!
Tire Sticker guys must be making some good money!! they really upped their game lately!!
Let’s get busy putting the PROXES on these 4 tires!!
I am trying hard lately to read instructions.. so lets do it!
Good thing I read this now!! LOL
This is for use after the stickers are applied…
It will clean the white letters when they are dirty.
Therefore I will use Acetone to clean the back of these letters.
A light quick wipe should do.
Tire Sticker guys: I’m sorry if I messed up again!!
But it looks good doesn’t it?
I promise, no matter what I do wrong, I will try to make the final product look right!! LOL
Maybe I should read these instructions too!
Only warnings and cautions written on here.
It’s probably written on the box, but… I’m just gonna do it!!!
I’m confident I can do it!
PROXES is really long!
What kind of face do you guys make when you are concentrating?
Do you stick out your tongue?
Or do you breathe heavy?
Alex “The Kid” (my son) filming this tends to do both!
He breathes hard, sticks out his tongue too!
I think I’m putting on too much glue!
I better finish before it starts drying!! It’s a lot of letters!
What kind of face am I making?? If anything I think I gotta fart from concentrating too much!!! LOL
Sorry everyone.. silly American style joke!!
I think I know why the gloves were recommended now….
How is your car looking???
I like to sing Japanese songs in my head when I’m doing this type of work…
I go to the gym everyday and lately I can’t stop listening to the same song!
Aya Shimazu’s version is incredible!
You ever hear it?
It’s incredible and it makes me run, jump rope and work out even harder!!!
It’s a great song!!! LOL
I think I went a little heavy with the cement before…. so this time I’ll use a little less.
On the fat letters I need to use a bit more I think…
There are skinny letters and fat letters so the amount of cement will vary letter to letter.
I don’t want to out too little and have a letter fly off!!
If I lose the letter “R” we would then have POXES ! LOL
That wouldn’t be cool at all.
My Kid likes helping with DIY projects too…
Especially for his own car….
But he is being a good cameraman and helper so I really can’t get too mad at him for not helping right now.
He may be 18 years old now but he still sometimes cries for his “Mama!”
I think I did better on this one than the first tire.
And I still got 10 free fingers!!
We’ll give this about 10 minutes of time to set and then take the film off.
We can take the film off the front tire now…
Uh oh… I got 9 fingers now!!
Please use the gloves they provide in the kit!!
Let’s do the front now.
I like it!!!
I’m getting better and better!!!
What do you think??
The TOYO alone was lonely!
Now with the PROXES, it looks much better!!!
The TOYO alone was worthy of 1 Thumb Up!
But today’s DIY work gets us 2 Thumb’s UP!!!
A job well done!!
“You did a good job Steve!”
I like it a lot!! What about you Kid?
You like it??
I think he likes it too!!
The Subaru project will continue!!
Some engine performance upgrades maybe next!?!?!
See you next time….
For more infomation >> DIY Subaru STI Project – Tire Stickers Look Great and EZ To Do! Have Fun and Improvise! – Duration: 15:02.
Mason Ramsey Tells the Story Behind His Selfie w/Justin Bieber | MTV – Duration: 4:16. MAN, IT IS AN
HONOR TO MEET YOU, I LOVE YOUR
WE HAVE TO TALK ABOUT YOUR HAT,
MAN, WHERE DID YOU GET THE HAT
>> WELL, I DON’T KNOW.
IT’S A CHEAP HAT.
>> Sway: PLIEN IS A CHEAP HAT
CAN YOU SEE HIS BOOTS.
LOOK AT THESE BOOTS, THESE MIGHT
BE THE– YEAH, MAN.
>> THANK YOU.
>> Sway: DUDE, YOU DOING ALL
THESE SHOWS YOU WENT FROM
SINGING IN WAL-MART, PERFORMING
AND THAT IS ENOUGH TO MAKE
HOW DO YOU STAY SO COOL LIKE
HAVE I SEEN YOUR PERFORMANCES
ONLINE AND YOU ALWAYS SEEM LIKE
YOU GOT A GRIP ON IT, HOW DO YOU
>> WELL, I JUST, YOU KNOW, JUST
GO OUT THERE AND SING AND I AM
LIKE THAT PERSON THAT FILLS IN
WHAT I DO IS AT THE STAY S
COOL, I TRY TO DON’T PAY ANY
ATTENTION TO THE AUDIENCE, AND I
>> Sway: THAKS’ IT, RIGHT, I
NEED TO TRY THAT, MAN, DON’T PAY
ATTENTION TO NOTHING AROUND YOU
AND JUST SING.
DOES IT FEEL GOOD TO BE ABLE TO
PERFORM FOR SO MANY PEOPLE.
>> OH YEAH.
>> Sway: YEAH, YEAH.
>> ESPECIALLY SINGING AT
>> Sway: THAT WAS THE BIGGEST,
YOU GOT A RUSH FROM THAT.
>> Sway: YOU MET JUSTIN BIEBER
AS WELL, HAVEN’T YOU.
>> OH YEAH.
>> Sway: WHAT WAS THAT LIKE
MEETING JUSTIN BIEBER.
>> WELL, HE DIDN’T GIVE ME ANY
ADVICE OR NOTHING CUZ I BARELY
HAD ANY TIME TO TALK TO HIM BUT
WE DID GET A SELFIE TOGETHER
SWSES A WHAT.
>> A SELFIE.
>> Sway: Y’ALL GOT A SELFIE, I
JUSTIN BIEBER SELFIE.
>> Sway: THAT IS BETTER THAN
ANY ADVICE HE COULD HAVE GAVE
SO I’M CURIOUS, LIKE WHO ARE THE
ARTISTS, A LOT OF ARTISTS ARE
LISTENING TO YOU AND I’M SURE
LINING UP TO COLLABORATE WITH
YOU, ABOUT WITH WHO ARE SOME OF
THE ARTISTS YOU WOULD LIKE STO
>> I DO LIKE BLAKE SHELTON, IS
HE THAT PERSON, THAT ONE AND
>> Sway: YEAH, YOU COULD LEARN
A LOT IF HIM, HE HAS HAD A LOT
OF GREAT EXPERIENCES.
HE’S LIVING THE SAME DREAM YOU
YOU ARE BOTH SINGERS, BOTH
MUSICIANS, YOU PROBABLY GOT SO
MUCH IN COMMON.
I CAN SEE YOU AND BLAKE, BLAKE,
DO A COLLABORATION WITH MY MAN.
Y’ALL CAN SEE THAT, RIGHT?
MY YOUNG HOMIE.
NOW YOU RELEASING A MUSIC VIDEO
FOR LOVE SICK BLUES THE SAME DAY
YOUR EP WAS RELEASED.
YOU MIND IF WE TAKE A LOOK AT
>> GO AHEAD.
>> OKAY, LET’S DO IT MAN, IT’S
♪ ♪ ♪
♪ I GOT A FEELING CALLED THE
BLUES, OH LORD
♪ SINCE MY BABY SAID GOODBYE
LORD, I DON’T KNOW WHAT I’LL DO
♪ ALL I DO IS SIT AND SIGH
OH LORD, THE LAST LONG DAY
♪ SHE SAID GOODBYE ♪
>> Sway: YEAH MAN, I LIKE
THAT, THATS WHAT THE COUNTRY
MUSIC HALL OF FAME MUSEUM,
>> Sway: WHAT WAS THAT LIKE
SHOOTING IN THERE.
>> IT WAS AWESOME.
AND WE SANG SAW SOME OLD CARS,
OF COURSE, MY FAVORITE, I ALWAYS
WE GOT TO SEE SOME OF THE STUFF
LIKE HANK WILLIAM SENIOR’S BOOTS
THAT CIRCLE THAT YOU SEE IN THE
VIDEO THAT I AM STANDING ON,
THAT IS THE CIRCLE THAT YOU HAVE
LIKE AN ECHO AND ARE YOU THE
ONLY PERSON WHO CAN HEAR IT.
>> THAT’S COOL, MAN.
GIVE IT UP FOR MASON RAMSEY
RIGHT HERE MAN.
ONE THING ABOUT THIS FAMOUS EP,
ARE YOU GOING TO PERFORM A SONG
FROM T RIGHT.
>> Sway: IS YOU KNOW, ARE YOU
SO YOUNG AND PEOPLE ARE
FASCINATED BY YOUR TALENT AND
HOW PRECOCIOUS YOU ARE AND EVEN
PUTTING TOGETHER THIS PROJECT,
YOU HAD A LOT TO DO WITH IT.
LIKE YOU PICKED ALL THE SONGS.
>> YEAH, ALL THE SONGS, ALL THE
RYNES AS A MATTER OF FACT, IF IT
WASN’T FOR ME THEY WOULD NEVER
FOUND OUT FAMOUS.
>> YOU BROUGHT THAT TO THEIR
SOMETIMES IT TAKES THE KIDS TO
TEACH THE ADULTS, ALL RIGHT,
For more infomation >> Mason Ramsey Tells the Story Behind His Selfie w/Justin Bieber | MTV – Duration: 4:16.
Fake It ‘Til You Make…A Baby (Full Episode) | Paternity Court – Duration: 16:24. Please be seated.
Hello, Your Honor.
This is the case of Watson v. Mahoney.
Thank you, Jerome. Good day, everyone.
AUDIENCE: Good day.
you are in court to prove
that you are not the biological father of the defendant’s
four-year-old son, Kevin.
You say that while you were away,
Ms. Mahoney was having sexual relationships with
two different men
and either of them could be the father.
Yes, Your Honor.
Ms. Mahoney, you say you are 99.999% sure
that Mr. Watson is the father and deny his accusations
Is that correct?
Yes, Your Honor.
So, Mr. Watson,
you say today’s results will determine the future of your relationship.
Yes, Your Honor. It will, um…
I’ve known her since we were kids.
If… We need to get these results because
you know, we are engaged and I would like to marry her
and I really hope
this is my son.
JUDGE LAKE: And you say the relationship’s on the line,
meaning if the results don’t turn out the way you would like,
the relationship, the marriage, everything…
It’s out the window, Your Honor. It’s over with.
Ms. Mahoney, how is this
paternity doubt affecting your child?
Hard. He takes it hard. He looks up to him a lot.
Sometimes he gets real short-tempered with him and…
He just, like, kind of… He’ll sit by him and…
He’ll move away and it’s hard as a mother to see that. (SNIFFLES)
JUDGE LAKE: And Kevin’s four?
So, he understands this rejection.
Yeah, it takes him really hard.
He kind of… He’s sheltered now.
And so, Mr. Watson,
you are rejecting the child?
Yes, Your Honor.
I’m not the dad, that’s why.
When I… When I was away…
When I came back.
She was cheating and…
She has a bad reputation of being,
basically, as I’m gonna say it, the neighborhood hoe.
Okay, we gonna try to use respectful language, but…
Let’s say, she had a reputation
of being very promiscuous.
Yes. Yes, Your Honor.
And so, you were away and you came home.
What did you find when you came home?
WATSON: She had two men staying with her and…
They were showering her… Showering her with gifts.
And taking care of her. Now, me as a man personally,
I’m not gonna do that for no woman…
Being a man, though, you shouldn’t have left me.
I never left.
Ms. Mahoney, did you have two men living with you?
I had no job.
(CRYING) I had nothing to fend for myself.
They were close family friends.
And they just wanted to help me, help them.
WATSON: No, they weren’t.
I agreed to let them stay and I if I needed a…
Some toilet paper, down… You know anything.
They would help provide it.
And so, were you providing them with anything
besides a place to stay?
A bedroom. That was it.
I would not…
JUDGE LAKE: Mr. Watson,
you are shaking your head. You don’t believe that?
They were… They were not close family friends.
That is not true, Your Honor.
I’ve known them since I was 13.
That ain’t no family friend. 13, nothin’.
So, did you ever ask him
are you sleeping with…
Yes. Your Honor.
Oh. You did?
And what was his response?
He said yes.
There’s been many girls doin’ it to the same…
We have a problem where, there’s lots of people that were in our life,
tryin’ to split us up.
So, he said he was having sex with Ms. Mahoney?
You confronted her about that?
Yes, multiple times.
What did she say?
And when I asked him… I told him
we can go together in front of this person
and ask them
and he doesn’t wanna…
But when I say
let’s go in front of him, she never does.
He doesn’t wanna do that.
He stalls out.
That’s not true.
(CRYING) Our family is on the line.
And I just hope we have…
So, why was…
Why was… Why would that other guy say he’s the father?
He says that’s my son.
There’s a difference between a father and a dad.
Just know that.
What you mean? He the one talkin’ about that’s his kid.
He provided for him.
Okay, I was away.
When I called you and he was hungry…
I was away. I could… There was nothing I could do.
Like I said, there’s a difference between being a father…
Okay, so if he was my… If he was my kid, so bring other men around my kid?
I do wanna make a clarification.
Did he say he was the biological father?
Or did this man say he was stepping up to be a father?
No, he said that… No.
Pretty much, Your Honor.
He said that was…
He takes that how he wants.
He said that was his kid.
And that he’s in love with her and that’s his girl.
He always says that. Even to this day he says that, Your Honor.
That is true. He has said he loves me.
And he’s in love with me.
But like I’ve said, I cannot control somebody else’s feelings
and as long as I’m doing what I’m supposed to do as a woman
to my family,
there is no reason.
And I’m just so ready to get all this…
But, Ms. Mahoney…
Why would a guy say to you…
I believe he probably does love me.
But I don’t love him and I needed help and all he wanted was a room.
But why would he say you were having sex with him
if you weren’t?
Because he knows
that if he were to tell him that.
That he’s gonna walk out and he’s gonna leave me.
And that’s what happened.
So, you’re saying, he just kept saying that to break you apart.
And I’ll be crying, you know, upset…
You know, cover me.
And I don’t want that. And I don’t want anybody else with Tevin.
It was basically crazy and, like…
Her friend, you know… Her and her friend fell out.
You know, and the friend called me one day
and was like I wanna… I wanna tell you everything.
And she basically told me everything. How she was…
What she did was lie to you because you and her had sexual intercourse.
Did you not?
No. We did not.
She… No. That did not happen?
We did not have sexual…
What did her friend tell you, Mr. Watson?
The friend told me how she was sleeping with multiple men
plus the two staying with her.
And how men were crawling through the window,
late at night.
But it’s my house so, why would I have to have somebody crawl through a window?
And this is what her former friend told you?
Yes, Your Honor.
Because I just found out they had sexual intercourse, under a bridge.
Okay? Under a bridge.
Did you have sex with this friend, Mr. Watson?
No, Your Honor. No I did not.
What did she do?
Be honest because this is our chance to clear our water
and make our family either complete or separate.
I did not have sexual relations with that women in any kind.
We’ve heard that before.
Was there sexual contact?
Yes, Your Honor.
So, how can you not expect this woman
to do that?
Because that was her best friend. That was her ride or die.
They were together every day of the minute.
Who doesn’t tell their best friend secrets?
JUDGE LAKE: You felt
she gave you the inside scoop?
Yes, Your Honor.
And then she wanted to get close to you but she gave you a scoop, all right.
So, when you found out Ms. Mahoney was pregnant,
what happened then?
You found out you were pregnant?
I found out I was pregnant
and it was kind of little iffy, at first.
But he, you know… He switched and he was like,
no, you had these men here.
I know you were sleeping with them.
Your best friend… And that’s around the time I found out
what had happened between them.
He just was really upset and told me I couldn’t name him a junior.
Till I came… Kevin.
That’s really close, you know.
(SOBBING) And that I’d been sleeping with him and they’re his kids.
So, I went… (SOBBING)
And we got DNA.
You took a DNA test?
I went… I was on government assistance
and child support.
Then we had to comply with them.
They asked me who the father was.
I told them who he was.
And he ran from all the things.
Then finally they found him.
And had him go up there and take the DNA.
What did the DNA test say?
That Mr. Watson was Kevin’s biological father?
And the State
put him on that birth certificate.
JUDGE LAKE: Did you bring that test result with you?
No, I didn’t.
Mr. Watson, why don’t you believe those results?
I even posted it on Facebook.
‘Cause, first of all, Your Honor,
her friend forged papers.
When she walked up showing me these papers,
first of all, I didn’t see no…
No government stamp on it and when she showed me it
quote me on this if I’m wrong,
when I read it, it read like, 99…
Of the black population.
Of the black population.
That was my response.
Of the black population in America,
that he’s 99… (CRYING)
And that DNA took about
seven, eight months just to get here.
And there was no…
It took seven, eight months?
They couldn’t find him.
To get his DNA.
And they already had ours.
So, you believe she forged these results?
So, when this court contacted your home state,
because we do our own investigation, as well.
MAHONEY: Yes, ma’am.
We wanted to find out how long it should take to get results.
And we were told
that it takes about two weeks to one month.
So, Ms. Mahoney, why would it take seven months…
…to get these results?
I don’t know why
and we were together and they showed up.
If you’re confident,
why wouldn’t you take a sealed envelope to Mr. Watson
and say, “This is the paperwork.”
But, Your Honor, we’ve been through so much
and spent so much in our life. I’d never expected him to think of me that low.
I would never do that, but…
That’s low of a person.
So, you never thought he would question paternity.
They’re documented government papers.
When your friend’s forgin’ papers, what do you want me to do?
My friend, she forged DNA documents.
When we were younger.
And… And it was real. It looked real.
So, I mean, I understand,
you know, the fact that…
You… And that would be in my mind, as well, but…
It’s just… I wanna get this done and…
I want the results and our family to be happy.
So, Mr. Watson, this is a little bit too close to home for you.
Yes, Your Honor.
You have a witness. I’d like to hear from her. Please stand, ma’am.
State your name for the record.
Ms. Watson, you are what relation to Mr. Watson?
You are his mother.
So, ma’am, you’ve heard the testimony that we have
presented thus far.
Uh. what can you tell us about this situation?
(SCOFFS) Well, I heard the rumors when they were… When it first came about.
I’m confused also what…
What all has been said and what’s all goin on.
Did you ever hear this information about
papers being forged?
DNA papers, you’ve heard that?
MAHONEY: She knew her too.
Yes, ma’am, and I did not care for her.
Do you believe that biologically Kevin is your grandson?
I am now questioning more and more.
That’s never been in my heart before and it is now.
And it’s really bothering me.
Thank you so much for your testimony, ma’am.
Yes, Your Honor.
You say this relationship is on the line now.
It’s been more than on the line.
That everything is riding on these results.
And I want to marry him and I want to have a future.
And I want our son to be happy.
But we fight.
All the time over this.
And he loves his dad. And I know he loves him.
For four years, this has been
hanging over your head?
All the time.
Yes, Your Honor.
Anything. We can be mad about our sandwich was cold
and we’re gonna end up fighting about this.
There’s a lot of bad water under our bridge.
And we were young, we’ve done a lot of things, you know,
to each other that we’re not proud of.
But I want it to be over with now. I want to move on.
I want… I want the answers.
There’s no way
to clear the water under the bridge unless you tell the truth.
That’s why I’m here.
Is there something
you have not said?
Is there another man
that could potentially be Kevin’s biological father?
Are there any other men?
No, ma’am. I have… We have broken up
and I’ve had other, you know, relationships with men
but never around when I got pregnant.
How close in proximity
to Kevin’s conception
did you have relationships with other men?
It was after, Your Honor.
WATSON: Not true.
It was after…
After he was born or after you got pregnant?
It was after he was born and he was
already probably about two years old.
Get out of here, man.
Not gonna argue.
You’re right. I’m not either. I don’t wanna argue.
We’ve done four years of arguing.
I just… I wanna know where to go from here. What to do.
Our family is on the line.
So, Mr. Watson, do you wanna make this work if
Kevin is your biological child?
Yes, Your Honor.
You wanna make this family work?
Of course, I love this woman.
And if he’s not?
I don’t know. I don’t know.
Be honest. You’re gonna leave.
Yeah, I’m gonna leave.
We’ll never see you again so…
(SNIFFLES) It’s like we never had anything.
You can’t just walk out on somebody like that.
JUDGE LAKE: I think there’s so much at stake here.
We can’t wait a moment longer.
(SOBS) Please, Your Honor.
Well, Jerome, let’s get these results.
Here, Your Honor.
These results were prepared by DNA Diagnostics and they read as follows.
Yeah, I’m gonna leave.
In the case of Watson v. Mahoney,
when it comes to four-year-old Kevin Watson,
it has been determined by this court,
are the father.
MAHONEY: See? I love you.
(CRYING) I love you so much.
I’m sorry, baby. I love you.
I love you so much.
I love you. I’m sorry, baby.
It’s okay. (CRYING)
YOLANDA: Come here. Come here.
I love you.
I love you guys, too.
I’m better now.
JUDGE LAKE: You relieved, Mr. Watson?
Can we go home and get married now? (GIGGLES)
Yes, we can.
It can be better.
But you have to do the work.
MAHONEY: That’s why we’re here.
I was just about to say… Ms. Mahoney, you’re so correct.
This was the first step.
Took you four years to get here.
To just get clarity.
From a situation that’s just been hanging over your head
and destroying your lives.
It’s been so hard.
And not just your life.
I’m gonna make that way better. I’m…
I’m gonna step up.
JUDGE LAKE: Yes.
Swear to God.
JUDGE LAKE: And that right there?
And I believe him and that’s why I wanted to be here, too.
But listen, what you have to understand is a child knows when they’re being
So, now, we don’t know what Kevin is feeling inside.
So, you all have the obligation now.
To do the work necessary to just…
Not just repair your relationship.
But to help repair the damage that has been done to him.
MAHONEY: Yes, Your Honor.
We have counseling and resources for you that are gonna help you
just get on the right path to a better future.
For yourselves and for Kevin.
I know you love him. I can see that.
Now, you just have to do what you have to do to create the foundation
from which he can launch
and soar, right?
All right. I wish you all the very best.
Court is adjourned.
For more infomation >> Fake It ‘Til You Make…A Baby (Full Episode) | Paternity Court – Duration: 16:24.
Huckabee Sanders Nearly Cries And Won’t Say Press Is NOT The Enemy Of The People – Duration: 7:39. For the entire month of July, Sarah Huckabee Sanders held … I think it was only three
press briefings on camera during the entire month of July.
So for the month of August, I guess she’s back at it.
She’s going out there every day trying her best to continue to lie to us and act like
it’s not getting to her.
And I say, “act like it’s not getting to her” because by now, I’m sure we’ve all heard about
the interaction that happened on Thursday during the press brief in between CNN’s Jim
Acosta and Sarah Huckabee Sanders.
Acosta wanted her to refute Donald Trump’s claims that the press is not the enemy of
the people, something Ivanka Trump actually did earlier that day, Sarah Huckabee Sanders
wouldn’t do it.
Take a look at the interaction here, and you’ll notice something about Sarah Huckabee Sanders.
You have to listen beyond her words.
Here it is.
I just wanted to follow up on Sarah’s question from NPR.
She asked you about Ivanka Trump’s statement that the press is not the enemy of the people.
And she asked you whether or not the press is the enemy of the people.
You read off a laundry list of your concerns about the press and then things that you feel
like are misreported, but you did not say that the press is not the enemy of the people.
I think it would be a good thing if you were to say right here at this briefing that the
press, the people who have gathered in this room right now, are doing their jobs every
day, asking questions of officials like the ones you brought forward earlier are not the
enemy of the people.
I think we deserve that.
I think the president has made his position known.
I also think it’s ironic-
But would you mind telling us, Sarah-
I’m trying to answer your question.
I politely waited.
And I even called on you, despite the fact that you interrupted me while calling on your
I said it’s ironic-
Which is why I interrupted.
But if you would not mind letting me having a follow-up, that would be fine, but it-
It’s ironic, Jim, that not only you and the media attack the president for his rhetoric
when they frequently lower the level of conversation in this country.
Repeatedly, the media resorts to personal attacks without any content other than to
The media has attacked me personally on a number of occasions, including your own network,
said I should be harassed as a life senate, that I should be choked.
ICE officials were not welcome in their place of worship and personal information is shared
on the Internet.
When I was hosted by the Correspondents’ Association, of which almost all of you are members of,
you brought a comedian up to attack my appearance and call me a traitor to my own gender.
In fact, as far as I know, I’m the first press secretary in the history of the United States
that’s required secret service protection.
Tell that to the five dead people of Indianapolis.
The media continues to ratchet up the verbal assault against the president and everyone
in this administration.
And certainly, we have a role to play, but the media has a role to play for the discourse
in this country as well.
If you don’t mind … If I may follow-up … Excuse me.
You did not say in the course of those remarks that you just made, that the press is not
the enemy of the people.
Are we to take it from what you just said … We all get put through the ringer, we
all get put in the meat grinder in this town, and you’re no exception.
And I’m sorry that happened to do.
I wish that had not happened.
But for the sake of this room, the people who are in this room, this democracy, this
country, all the people around the world are watching what you’re saying, Sarah.
And the White House for the United States of America, the president of the United States
should not refer to us as the enemy of the people.
His own daughter acknowledges that.
And all I’m asking you to do, Sarah, is to acknowledge that right now and right here.
I appreciate your passion.
I share it.
I’ve addressed this question.
I’ve addressed my personal feelings.
I’m here to speak on behalf of the president.
He’s made his comments clear.
Okay, I’m gonna get to what she said in a moment, but let’s focus first on how she said
You can clearly hear in her voice right there that she is about to cry.
This job has broken her, and she has hit her tipping point.
This is only the second time since she has been press secretary that there has been visible,
audible evidence that this woman was about to lose it at the podium.
The other time was when the small child asked her about school safety and gun control.
There, right there, she was 100% about to start crying.
And that is why she started going on the offensive.
She started attacking Acosta.
She started attacking CNN.
She went through her list, read her list because she had it written out.
God only knows how long she’s been carrying it around, but she was ready to go through
that list of perceived grievances that she has against some of the members of the press
She did not address Acosta’s question.
She did not address the fact that CNN reporters were essentially shouted down, cursed out,
given the finger at Trump’s rally the other night.
The press is the victim in this instance, Sarah, not you.
You have fostered many of the ill wills that the public has towards them, you and your
So you want to sit there and read your little list of grievances, things that make you so
sad you almost cry, go ahead, but nobody cares.
You are a horrible human being.
Your only job seems to be to go out there and lie to the press every day.
And even though you’re the one doing the lying, you have the audacity to call them fake news
and say that they are the enemies?
You, Sarah, are the enemy here.
The press deserves better.
And the press, if they had any sense, and I know corporate sponsors and corporate leaders
won’t let them do this, but if they had a little bit of sense, they would band together
and just say, “You know what?
We’re not going to attend another one of these disgusting press briefings with this disgusting
But if you get rid of her, maybe we’ll start coming back.
But until then, have fun with all of the press and publicity that’s gonna be coming your
way because none of it is going to put you, Mr. Trump, in a positive light.”
If the press had any scruples here, that is what they would be doing.
But instead, they’re gonna keep showing up at these press briefings, keep getting cracked
on by Sarah Huckabee Sanders, and then have the audacity to themselves get on Twitter
and whine about them being the victims.
You have a choice.
Everybody in that room has a choice.
And I do feel for the press here.
And I believe in this particular instance, they were the victims.
But if you keep putting yourself in that situation without properly fighting back or just saying,
“I’m done”, then at some point, it becomes even harder to feel some sympathy for you.
But Sarah Huckabee Sanders, that’s why I have no sympathy left for her.
She could have started bawling in the middle of her little tirade there, and I would have
And I’m the kind of person that usually has empathy for everyone regardless of political
affiliation or anything that it doesn’t affect me.
The fact that they’re a human being, and they’re in trouble and need, that gets to me.
But Sarah Huckabee Sanders had ruined that for me, for her, so I don’t care if she bursts
What she has done to this country is far worse than her not getting to eat a meal at a restaurant.
For more infomation >> Huckabee Sanders Nearly Cries And Won’t Say Press Is NOT The Enemy Of The People – Duration: 7:39.
Nietos de Cantinflas luchan con la viuda de su padre para salvar la tumba familiar – Duration: 4:11. For more infomation >> Nietos de Cantinflas luchan con la viuda de su padre para salvar la tumba familiar – Duration: 4:11.
The Incredible Alcatraz Prison Break – Duration: 23:18. – [Ryan] This week on Buzzfeed Unsolved,
we cover the thrilling escape
from the famed Alcatraz Prison.
The inmates who pulled this off
did so by executing an ingenious and daring plan.
And who doesn’t love a good prison break, right?
– I do.
Will there be tunnels?
– You could say there was a tunnel.
I guess if you were sitting in a cell for a long time
you would be able to come up with
pretty cool things to escape.
– That being said, the things that they did come up with,
I was impressed by.
– But I’m easily impressed.
– Well I guess tell your story.
– [Ryan] Formerly a military base,
Alcatraz Island opened as a federal
maximum security prison in 1934.
The prison was nicknamed The Rock,
due to the fact that the prison sits
on a 22 acre island about a mile-and-a-quarter
away from the city of San Francisco.
Because of this, the prison gained a reputation
as being inescapable, with water surrounding the prison
hovering around 48 degrees fahrenheit
to 54 degrees fahrenheit all year,
along with formidable currents pulling
strongly out to sea leading up to low tide.
– San Francisco is very cold.
– It’s very cold.
And I have very delicate Southern California skin.
– “The coldest winter of my life
“was a summer in San Francisco.”
I thought you were gonna go into your typical
Midwestern people know winter and cold.
– Midwestern people do know.
I’ll tell you. – Oh, Jesus Christ.
– I’ll tell you.
– It’s fine, we don’t have to go into it.
– We know snow.
– I’m very happy for you, what a feather in all your caps.
So shall we move on?
– If you must.
As time went on, the prison would fall into disrepair,
and the budget to fix things was limited.
This would become an important factor
in the inmates’ escape.
So without further ado, let’s meet the escape crew.
First up, we have the Anglin Brothers,
John William Anglin and his younger brother Clarence Anglin,
both in their early 30s at the time of the escape.
The brothers were serving time for robbing a bank together.
– [Shane] I wouldn’t mind being in a jail cell with my bro.
– [Ryan] Yeah, the thing is, like,
being in prison, obviously not ideal.
– [Shane] Yeah.
– [Ryan] But you got your bro there with you.
– [Shane] You got your bro!
– [Ryan] And they actually were next door to each other.
– [Shane] That’s very fun.
– [Ryan] That’s very fun.
– That’s a big bonding moment.
– I wonder if one of them got the letter, like,
ooh, where are you going?
And the other one was like, I’m going to Alcatraz.
And he was like, me too!
– And they just jump up and down.
Like they got accepted to college together.
Next we have Frank Morris,
in his mid-30s at the time of the escape,
who had been abandoned as a young child,
put in foster care and run away,
and was then in and out of prisons
since he was just 13 years old.
He was also serving time for a bank robbery.
The final member of the crew is Allen West,
age 33 at the time of the escape.
West began serving time by the age of 14
and bounced around various federal prisons.
Our crew of escapees established,
let’s jump into the inception of the escape.
It’s said that West first approached Morris
with a plan to escape in early 1960.
West apparently knew of a ventilator cover above
Cell Block B that might not be sealed over with concrete,
as some of the other vents had been.
If true, this could provide them
with a way to get onto the roof
of the prison from the inside.
West also began working with the cell house
maintenance crew, which gave him insight
into the building’s structure, layout, and weaknesses.
By September 1961, the Anglin Brothers,
Morris, and West all had requested moves
to cells that were close to each other in Cell Block B,
directly under the unsecured vent cover.
All cell moves were approved.
– [Shane] This goes back to my thinking
that prison, maybe back then or maybe
in this particular prison, didn’t seem so bad.
You just put in a request?
And they’re like, oh you wanna move?
You wanna be with your pals?
– I mean, the thought is like
– They should’ve just asked to leave.
– I think this is maybe a lesson
in humility for this prison,
the prison guards and the prison warden.
– Obviously this prison has been thought of
as this fortress of security.
It’s thought of as inescapable.
It’s surrounded by water.
– Oh, so there’s an element of hubris here.
– What’s the worst they’re gonna do?
Do what you want.
It doesn’t matter because you’re never gonna escape here.
In terms of who planned what, the details are a bit murky.
But one thing is for sure.
The plan that the four men would execute
was undoubtedly bold and ingenious.
That being said, let’s break down the plan,
starting with phase one, deception.
With Alcatraz, it wasn’t just about
escaping the prison walls,
as it was also about making it back to the mainland
and avoiding capture in that process.
In order to prevent that,
the men knew they needed a head start.
To accomplish this, the men created
painted dummy heads made from a plaster-like
mix of soap, concrete, and other materials.
And complete with human hair.
They laid the heads in their beds to fool the guards.
Sure enough, on June 12,
on the morning following the escape,
when the 7:00 AM bell went off to wake the prisoners,
guards discovered that the escapees
appeared to still be asleep in their beds.
It wasn’t until one guard reached
into Morris’ cell and pushed the head,
only for it to roll away and strike the ground,
that the guards realized something was was wrong.
To this day, the dummy head that struck the ground
still has the damage that resulted from this fall.
It’s unknown who came up with
the idea to create dummy heads.
However, Clarence worked as a barber
and had access to human hair trimmings.
Either way, phase one deception as a success.
– If I were that guard and I reached into that bed,
oh, wake up sir, you’re missing.
You know, his head rolls out.
First I’d scream, I’d go, ah!
– I don’t know my own strength, I just decapitated a man.
– And then I’d just stand there and go
They did it!
– Very good.
– Very good. – Very good.
– I would be angry if the craftsmanship weren’t so good.
– It’s very good.
– But if I pick it up and I see the human hair,
I’m thinking, well, they really
pulled out all the stops here.
I am not a fool.
– [Ryan] This brings us to phase two, breakout.
After laying the dummies in their beds,
the men went to work on busting out of their cells.
All four of the men’s cells had
five inch by nine-and-a-half inch ventilation grates
in the back of their cells.
Perhaps due to his time on maintenance,
West may have known that the wall surrounding the grate
was less than six inches thick,
making it possible for each man
to expand the hole in their cell to fit through.
For months, each of the escapees
had drilled small, closely-spaced holes
around the cover of the ventilation grates.
For this, they used crude handmade tools,
like spoons stolen from the kitchen
and a drill made from a vacuum cleaner motor.
These holes made it possible for them
to remove the entire small section
of the wall around the air vents,
which they then kept covered up
with their musical instruments
and with fake covers made of cardboard.
I’m also not that handy, so retrofitting,
you know, a vacuum motor, turning it into a drill,
I don’t know if I’d be able to think of that.
– I don’t know, I don’t know.
So they’re essentially just perforating it.
– Yeah, they’re just,
they’re priming it by making little holes,
making the wall a little bit weaker
so that they could just push through this wall.
– And this is out of view of the guards?
– So it’s not out of view, but this prison
allowed an hour called, I think it was called happy hour,
where the inmates would
– Everybody gets margaritas?
– No one gets margaritas.
But the inmates who played musical instruments
were allowed to play their instruments during this hour.
– What is this prison?
Everybody talks, ooh, The Rock,
you don’t wanna go to The Rock.
– That’s true.
– Oh, the happy hour at The Rock is only three times a day.
– It sounds like the prison from Paddington II.
– Don’t forget your loot.
– Yeah, under the cover of all this shitty music playing,
they were probably able to do some drilling.
These holes allowed them to crawl through
to a utility corridor located directly behind their cells
that was typically left unguarded.
From there, they were able to climb up
to a hidden landing area directly above their cell block,
where they had been working in secret for several months.
Some or all of the escapees had been
given permission, at some point,
to do maintenance work on this landing area.
In fact, to this day, you can still see
where West actually completed part of the painting job.
Apparently, West had even convinced the guards
to allow him to hang blankets that concealed his work,
because it was sending dust
cascading down to the ground level.
In reality, he was actually using blankets
to hide the work that was really being done up there.
This concealed landing area became
the escapees’ secret workshop.
They even built and used a primitive
periscope to take turns as lookout.
In the workshop, they were able to build
the aforementioned dummies, tools,
and other items they’d used to escape.
It’s worth noting that, on the night of the escape,
West never made it to this landing spot,
due to the fact that he was unable to break through
the last portion of the wall around his ventilation grate.
Consequently, West was left behind.
From the landing, the ceiling was
about 30 feet directly overhead,
and the men were able to climb to the ceiling
via the pipes and reach an air vent
that they had previously pried off
in preparation for their escape.
Experts believe that a sound reportedly
heard around 10:30 PM was the sound of the air vent
cover being pushed off on the roof.
And this marks the approximate time
the escapees would have reached the roof.
They then climbed down from the roof
via a pipe next to the back of their cell block,
climbed the 15-foot fence, and made their way
to the north shore of the island.
Which brings us to the next phase,
phase three, escaping the island.
In their workshop, the inmates had built life preservers
and a six-by-14 foot rubber raft,
all made from prison issue raincoats.
They’d gathered over 50 raincoats for the job,
possibly stitching them together
using sewing machines in the clothing or glove shops.
They even vulcanized the rubber raincoats
by holding the seams up to the heat from the steam pipes,
an idea they’d gotten from a popular Mechanics’ issue.
The raft was inflated using a converted musical instrument,
a concertina ordered by Morris back in April.
– Do you think every day for 50 days
they just kept going, lost my raincoat again.
– I mean there was a lot
– 49th time in a row, can you believe it?
– There was a lot of raincoats.
– I guess, yeah.
– And I guess they weren’t keeping inventory of them.
I’m guessing that they got a fair amount of poop on them,
they were like, all right, throw that in the trash,
and they were just walking by, taking them.
Oh, I guess in the workshop.
– You know what I find with government employees,
they’re always thrilled to waste the money.
You know, they’re like, hey,
that’s on the government’s dime.
So if you’re a prisoner and you’re like, I lost a raincoat,
they’re probably like, yeah, hey,
have more, I don’t care, it’s not mine.
That’s coming from Uncle Sam’s pocket, pal.
– You’re not taking from the guard’s
personal stash of raincoats.
But 50 does seem like an inordinate amount to gather.
– Wow, they vulcanized them.
On a steamy, the steamy pipes!
– Off a popular Mechanics’ issue.
– I love it.
– [Ryan] The plan was to sail across San Francisco Bay
in their raft to Angel Island,
about two miles north of Alcatraz Island.
From there, they would sail again,
this time across Raccoon Strait, about a half-mile wide,
which would then bring them to the mainland.
There, they would steal a car
as well as clothing, according to West,
who would later inform the FBI
about a good deal of the plan.
Once the men were discovered missing,
Alcatraz went into lockdown as a search began.
Guards quickly found the secret workshop,
the hole in the ceiling, and footprints on the roof
and at the bottom of the pipe they climbed down.
The FBI joined the case, as would the Coastguard
and Bureau of Prison Authorities,
in what would be a wide-scale search.
However, the escapees, as well as their raft,
were never seen again.
Even though we know the three men
made it off of Alcatraz Island,
what happened to the three men after that remains a mystery.
That being said, let’s get into the theories,
of which there are only two.
That the men escaped and survived,
or that they perished in the journey over to the mainland.
Let’s start with the latter.
The Bay’s waters are known for being frigid,
and there is a strong current
that could’ve worked against the escapees.
Experts point out that the trio’s goal
of taking the raft north to Angel Island
would have been extremely difficult at this time,
especially given that they had paddles but no rudder.
Additionally, results of a reenactment of the escape
carried out by Dutch scientists in a piece for PBS,
in which they built a raft
similar to the one the escapees used,
found that two of the men would have
to work to keep the raft inflated,
leaving only one to paddle.
The weather would’ve been about 47 degrees fahrenheit
when the men made it outside the prison.
The water is said to have been 54 degrees fahrenheit.
If the raft had sunk or the men had gone
overboard into the water,
they would probably have only lasted two hours
before starting to lose consciousness,
according to author Jolene Babyak.
– [Shane] I tell you what,
you ever looked out into the waters in that bay?
– [Ryan] I’ve looked out to the waters at night,
at the ocean, it’s scary.
– [Shane] But that bay in particular,
I don’t like the look of it.
– [Ryan] The ocean is scary in the daytime.
– [Shane] It’s scary enough, but that bay?
Scarier than the ocean.
– [Ryan] I can’t speak to that.
– [Shane] It’s rocky and it’s cold.
– The only time I’ve ever looked at that bay
has been in a very fun context.
I was watching a group of seals fight each other.
– Oh, that’s fun.
– It was really fun, they were slapping each other away
and one of them fell off.
– But imagine that, if you’re trying to escape
and a seal hops up on your boat and starts slapping you.
– That’s not ideal.
– I don’t think that’s ideal, it’d be cute,
but it’d be like, come on man, gotta escape,
very funny, meet you back on the shore,
we’ll do this again some time.
On June 12th, bits of wood resembling a handmade paddle
were found in the water near Angel Island.
The pieces were identified as belonging to the escapees.
On June 14th, bags made from raincoats
were found halfway between Alcatraz and Angel Island.
These bags contained irrefutable evidence
that they had belonged to the escapees,
photos of the Anglins and their family,
nine pieces of paper with a list
of people to contact on the outside,
and a letter written to Clarence Anglin.
Many point to these personal items
as evidence that the journey was ill-fated,
as these would have not been items easily given up.
On June 15th, a homemade life vest
was found floating near Cronkite Beach.
A second life vest was discovered
on June 22nd no more than 100 yards
from the eastern coast of Alcatraz Island.
Its ties were still knotted.
All three of the men would have set out
with very little money, so the fact
that the hordes of authorities on the case
never found a shred of evidence
of any thefts or holdups tied to Morris or the Anglins
for food, clothing, or transportation
made it seem unlikely that they
made it to the mainland alive.
The FBI states that they never found any credible evidence,
either in the U.S. or abroad, that the men lived.
In mid July 1962, about six weeks after the escape,
a Norwegian shipping freighter, the S.S. Norefjell,
spotted a body in the ocean about 20 miles
away from the Golden Gate Bridge.
However, they did not call in the sighting
and did not report it until fall,
when they returned to San Francisco,
and the body was never recovered.
– Look, it’s a dead guy.
– Oh well.
– I guess if it’s a freighter,
I mean, one, you should report it,
but if it’s a freighter,
I can’t imagine they can really stop.
Also, you know, time is money.
– Sure, I get not stopping.
But a little phone call.
– Call it in.
– Like hey, I think I saw a dead body.
And because the body was never recovered,
we can’t tell if it’s one of these three men.
– So, you know, shit happens in the sea I guess.
Though, there is plenty of credence
to our second theory, that the escapees survived.
Morris and the Anglin Brothers
had a raft to help them navigate the waters,
which many people have successfully been able to swim before
without the benefit of a raft or life jackets.
A triathlon is held each year
in which participants complete
a mile-and-a-half swim in the same waters
around the same time of year that the escape occurred.
Participants do say that the current,
choppy waters, and wind are major factors to contend with.
But according to Jeff Harp,
a security analyst for CBS San Francisco
who worked with the FBI for over 20 years
and goes for swims in the San Francisco Bay,
he doesn’t know of any contestants
in the triathlon who haven’t been able to complete the swim.
Furthermore, most of the bodies
of those who drown in the Bay will float after a few days,
but despite extensive searches,
the fugitives’ bodies were never found.
U.S. Marshal Michael Dyke has run a simulation
with help from the Coastguard that determined
the escapees could’ve survived in the water
for two-and-a-half hours at least if the raft plan failed.
The same Dutch scientists who carried out the reenactment
of the escape also created a computer model,
which they presented in 2014, that could recreate
the conditions in the water on the night of the escape.
The model found that there was a very narrow window
between 11:30 PM and midnight during which
the trio would have needed to launch their raft
in order to have a chance of making it to land.
And since the inmates may have made it
to the roof by 10:30 PM, this window seems possible.
Though, even then, they would’ve had
to let the currents carry them to Horseshoe Bay,
northeast of the Golden Gate Bridge,
rather than trying to reach Angel Island.
The model also suggested that items left
at the shoreline near Horseshoe Bay
would drift back towards Angel Island,
where some of the escapees’ items
were recovered once the tides reversed.
And while the Dutch scientists’ real life
recreation of the escape did not work,
as they were unable to withstand the currents
and bring the raft to land,
they still got fairly close to Golden Gate Bridge
in a little over an hour aboard the raft.
One of the scientists conceded.
He still believes the escapees might
have been able to pull it off given
the rush of adrenaline and need to survive.
Also, one thing I’m gonna point out here,
I don’t know how accurate this test is
if you have scientists doing
the paddling themselves in the boat.
– [Shane] Oh, those fucking poindexters?
– [Ryan] I just like, I mean, I feel like,
maybe have some guys that are a little closer
to the dudes who were escaping.
– [Shane] Yeah.
– I guess I am generalizing that scientists
are meek individuals, but I’m just saying
that if these are inmates,
hardened criminals that are trying to survive,
I don’t know if this is the best people for the job.
– Scientists could go to the gym, right?
– I suppose.
– Chris Pratt in the Jurassic World film.
– He’s not a scientist.
– I thought he was.
– He’s also a fictional character.
– His name is Owen Grady.
Whoa there, Blue.
– Oh Jesus Christ.
– Everybody loves Blue, a great character.
– [Ryan] David Widner, the nephew of the Anglin Brothers,
has said that his uncle Robert,
one of John and Clarence’s older brothers,
confessed on his deathbed to his sisters, quote,
“that they didn’t have to worry about their brothers,
“that he had been in touch with them and they were okay.”
Widner added that his grandmother,
who would’ve been John and Clarence Anglin’s mother,
would sometimes receive roses with her sons’
signatures on the card following the 1962 escape.
Multiple family members of John and Clarence Anglin
have claimed over the years at family funerals
that they have noticed mysterious women
wearing veils and/or heavy makeup,
which could have been the undercover Anglin Brothers
coming to pay their respects.
In 2015, a history channel show claimed
that a photo taken of two men in Brazil
13 years after the escape depicted
brothers John and Clarence Anglin alive.
The photograph came from Fred Brizzi,
a childhood friend of the Anglin Brothers,
who turned it over to the family sometime in the 1990s.
Brizzi’s story is that he was on a trip in Brazil
when he happened to run into John and Clarence at a bar.
Brizzi has since passed away.
Many in the Anglin family have held onto the belief
that John and Clarence survived the escape.
They also believe the photo shows John and Clarence.
An expert connected with the history channel show
concluded that the photo showed the Anglin Brothers.
The U.S. Marshal’s office investigated the claim.
Their experts do not believe
the photo depicts John and Clarence.
However, they acknowledge that a solid determination
isn’t really possible given the age and wear to the photo
and the fact that the subjects are wearing sunglasses.
– Their execution of this plan was so impressive
that, I know it’s technically not legal to do this,
but just give ’em a pass.
– Also, let’s say they survived the escape.
The fact that they didn’t get into trouble
for the next 50 years means jail worked for them.
– Jail worked.
– They received penance.
They’ve stuck to the plan, they had a lot of conviction,
and, you know what, they deserve to be free at that point.
– I mean, prison, truly, should be
about reforming the soul of a man.
– And these folks, all they did
was drink caipirinhas in Brazil.
As for the aftermath of the escape,
Allen West, the inmate left behind,
cooperated with officials in the search,
finishing serving his sentence
across three different prisons following Alcatraz,
and was released in 1967.
But he remained free for only one year
before landing himself concurrent sentences of five years,
one to three years, and life for grand larceny and robbery.
He died in 1978.
Alcatraz shut down in March 1963,
less than a year after the Anglin-Morris escape.
The FBI officially closed their case
on the 1962 escape from Alcatraz
on December 31st, 1979,
over 15 years after their investigation began.
However, they add, quote,
“It’s one mystery we’d all like to solve.” End quote.
The case is expected to remain open
with federal marshals until either
the fugitives are arrested,
evidence of their deaths is found,
or the fugitives reach 99 years of age.
In the end, nobody truly knows if the enterprising
bunch of Alcatraz escapees completed their journey,
or if their midnight voyage was ill-fated.
For now, the case remains unsolved.
– I tell you what, on my 99th birthday,
I’d be walking into the U.S. Marshal’s office
and just being like, fuck you guys.
– Your grandson wheels you in in a wheelchair
and you’re just, sunglasses on, just
– Fuck you coppers.
– It’s me, I was drinking caipirinhas for the last 30 years.
Suck it coppers.
And then you just die in your wheelchair.
For more infomation >> The Incredible Alcatraz Prison Break – Duration: 23:18.
The Dog Whisperer with Farley Archer: Dog Singer – Duration: 5:14. ♪♪
I’m Farley Archer,
and welcome to the Dog Whisperer.
Eastern South Dakota’s number one source
for everything canine.
Except for the teeth canines.
For that, you best see a dentist.
I’m just joshing, uh, that’s a little dog humor for you.
Uh, we’ve got a great show lined up for you tonight,
so let’s get started!
Uh, take it away Terry, play that funky music.
[recording] Hello everyone, I’m Farley Archer,
and welcome to the Dog–
Farley: Terry, you’re just playing back everything
that I just said.
Yeah, you did a really good job.
Thank you, but, Terry, you’re not playing the intro music.
It’s just talking.
Tonight we have a very special musical guest,
you can catch them performing live this Friday
at the 27th Annual Prairie Invitational Dog Show
at the Mitchell Corn Palace.
Ladies and gentlemen, making their public access Channel
KPPW debut, performing their hit song, Lost Dog,
please give it up for the dog singer,
featuring Terry on the flute!
[80’s synth music starts playing]
♪♪ A dog asked to borrow my phone one day. ♪♪
♪♪ The dog asked to borrow my phone to say, ♪♪
♪♪ Hello, woof woof, I’ve just called to say I love you, ♪♪
♪♪ won’t you please pick me up from the park? ♪♪
♪♪ ‘Cause it’s starting to get very dark. ♪♪
What is going on here?
Terry, cut the music.
Ah, ladies and gentlemen, this is our station manager here.
Uh, Christopher Johnson!
What are you doing?
Just uh, singing a song, really.
We canceled this show.
You were supposed to be out of here last week.
I know but–
What are you doing?
I’m a dog whisperer.
Just trust me?
I know you sent us the cancellation notice,
and told us to vacate the premises.
But I think you did that with your head and not your heart.
I’ve never told you this before–
but you are everything I’ve ever wanted to be.
I look up to you so much,
like the father I wish would have taught me.
And not just because I was expendable in grain silos.
This is all I’ve got.
I’m at the end of my rope.
I really need this.
If you can’t find room in this studio,
I know that there is room in your heart.
I want you out of here.
Terry, help me!
Help me, Terry!
Go for it.
You got it.
Dive, dive, dive.
Right there, dive, dive.
You were caught.
We’ll be right back after this.
♪♪ a dog asked to borrow my phone to say ♪♪
Hey, just here to remind you to set an alarm on your phone
real quick, to like, subscribe, comment, share.
Just five seconds from now, just go ahead and set that.
I’ll call you.
For more infomation >> The Dog Whisperer with Farley Archer: Dog Singer – Duration: 5:14.
Lingke Family Summer camps oversized swim ring and Rowing competition challenge! | Xiaoling toys – Duration: 8:51. Lingke Family Summer camps oversized swim ring and Rowing competition challenge! | Xiaoling toys